GoldenEye 007 Nintendo 64 Community, GoldenEye X, Nintendo 64 Games Discussion

[jim102]

The rom starts but I just see delete files. A game is not possible to create.

I see a thing like that after 10 secondes.

OP Code R4300i no taken in charge to: 801BD6B4 Unknown 00 00 00 01

Stoping Emulation!

I do not know what the core/nucleus of the emulator has but I tried to redownload the emulator, changes plugins, setting of roms.

I am supposed to see a game named Dark and a full completed game.

Last edited by jim102 on Sat Jan 01, 2011 9:41 am; edited 1 time in total

[radorn]

have you set save type to eeprom 16k?

[Wreck]

Also check to make sure that your Controller Pak is enabled, or else you won't be able to use that as another means of saving / loading agent profiles.

Moving this to the Perfect Dark forum.
(I know this has more to do with emulation, but it is directly aimed at PD.)
_________________

YOUTUBE | TWITTER/X | FACEBOOK | VAULT | MOD DB | RHDN

[jim102]

eeprom 16k? No I just let the save type like automatic detection like it has always been.

The expansion pak is enabled. I looked for see Controller Pak but nothing.

I noticed something but I do not think it is important.

You can set the rom settings but when you open settings from the option menu, settings of the rom:

The section is grey and I can`t change anything. I spent time to solve that but no success.

Roms are set like that:

Noyau R4300i : Recompiler

Self mod.Code : Protect Memory

Size RDRAM: 8 Mo

Advanced Block Linking: Yes

Save type: Detect automatically

Counter Factor: 2

Larger Compile Buffer,Register Caching,SP hack and TLB checked

Delay SI Interrupt and RSP audio Signal uncheck

-------------------------------------------------------------------------------------


If I compare the settings roms to the emulator, THE EMULATOR,

Settings of the rom:

Noyau R4300i,Self Mod,size RDRAM and advanced block linking are all BY DEFAULT!!!

The save is detected automatically, Counter Factor by default and ONLY register caching and TLB are UNCHECK!!!


You see the problem? That thing could also blocks the emulator to load new levels I made!

I click to change and nothing. Maybe it is a deactivated set but I never found it.

It would be a real great new thing I would have learnt since I use PJ64!

[jim102]

My plugins are:

Plugin video: Jabo`s Direct 3D 8 1.6
Plugin audio: zilmar`s audio plugin
Plugin control: darkman input 4,0c

And sometimes I change the audio for the jabo 1.6

I made 16 EEPROM for the save and I see Game Pak and new above and I open and it stay there, I can hear the music but the emulator do not open the game anymore. If you leave and return, it will be a black screen with playing music menu.

Settings of the emulator when you open PJ64 stay original except the roms.

4 EEPROM does not change anything and R4300i the same again at the screen.

32 SRAM does not open anything

128 Flash Ram is the same thing like the 32 SRAM.

[jim102]

I solve the problem of the core because I had an old rdb file. The rdb file who`s making the new changes applications.

I just downloaded yesterday Project64.RDB v1.6.016 (Officiel)

This is a 450 Ko and the last was inferior. Put in in the RDB folder situated in the docs folder and you have another one in main setup folder.

But the real problem was the advanced settings. It depends of your emulator, your rom and your computer.

It is in function of tries and mistake. Testing emulation.

You have choice with good options but take the minimum to get it work or else the emulation will not work.

You do not need to use many many options even though they are good. Use the maximum options as your emulation requires. But it has a limit and find it.

[acceptable67]

For each rom it does not matter if there set at default, it's mandatory that you change them.
_________________

Rare wrote:

Perfect Dark Forever.

[jim102]

the settings of the ROMS yes but the settings of the rom OF PJ64 only it is impossible to change. The emulator`s rom settings section if you like. When you just open the emulator and make settings--->settings of the rom, you notice a grey section and it is not changeable.

Only register caching and TLB are checked! It needs more!

Do you get it?

Just by curiosity. Maybe that are the minimum checked to get work. The emulator should make some bad emulations like unloaded level and others...

I would really want to change it!

I guess the emulator needs some adjustings and not just the roms

[acceptable67]

jim102 wrote:

the settings of the ROMS yes but the settings of the rom OF PJ64 only it is impossible to change. The emulator`s rom settings section if you like. When you just open the emulator and make settings--->settings of the rom, you notice a grey section and it is not changeable. Only register caching and TLB are checked! It needs more! Do you get it? Just by curiosity. Maybe that are the minimum checked to get work. The emulator should make some bad emulations like unloaded level and others... I would really want to change it! I guess the emulator needs some adjustings and not just the roms

Didn't you start the game first to check off the options! :X
_________________

Rare wrote:

Perfect Dark Forever.

[jim102]

Before, I see the settings of the emulator I told you and during the game I only see the settings of a rom.

Maybe the emulator when it charges a rom it takes the same settings temporarily to recover his default settings after.

It`s really weird the detail I noticed but it always been interesting to try to set it.