GoldenEye 007 Nintendo 64 Community, GoldenEye X, Nintendo 64 Games Discussion

[compoopertech]

Can someone please please please tell me Perfect Dark's Zelda Keycode. I really wanna play PD with the Gameshark.
_________________
The Computer Tech

[fantsu]

Straight from the krijy's manual:

Hacking with a version 3.0 cheating device
__________________________________________

The only way to hack Perfect Dark with a version 3.0 cheating device is by
using the in-built code generator. You'll only be able to run the game in lorez
mode while hacking, so you're pretty limited. I won't go into detail about how
to use the code generator. The most important part is the memory editor, which
will allow you to change values that are in the memory.

To get Perfect Dark working with a version 3.0 cheating device you need to
first load the cheating device up with a game that uses the factory default
keycode (this could be Super Mario 64 or GoldenEye). At the menu select
keycodes and choose the Zelda keycode. Choose a keycode you don't have the game
for and you're screwed, so be careful and don't rush your way through this menu
and make a fatal mistake (like I once did). Once the Zelda keycode is
activated, turn off your N64 and put Perfect Dark in.

To play in hirez you need a 50 line long enable code. The following code must
be on at all times in hirez:
NTSC AND PAL
F1000204 27BD
F1000206 FFE4
F1000208 AFA8
F100020A 0014
F100020C AFA9
F100020E 0018
F1000210 3C1A
F1000212 A075
F1000214 375A
F1000216 C000
F1000218 3C08
F100021A A07C
F100021C 3508
F100021E 5C00
F1000220 241B
F1000222 0180
F1000224 8D09
F1000226 0000
F1000228 237B
F100022A FFFF
F100022C AF49
F100022E 0000
F1000230 2108
F1000232 0004
F1000234 1F60
F1000236 FFFB
F1000238 235A
F100023A 0004
F100023C 8FA9
F100023E 0018
F1000240 8FA8
F1000242 0014
F1000244 27BD
F1000246 001C
F1000248 3C1A
F100024A A075
F100024C 375A
F100024E C000
F1000250 0340
F1000252 0008
F1000254 0000
F1000256 0000
81000204 3C1A
81000206 A075
81000208 375A
8100020A C000
8100020C 0340
8100020E 0008
81000210 0000
81000212 0000

With this code on you'll be able to access most of the solo levels. Some levels
won't work because they come into conflict with the enabler. The levels that
won't work are the solo mission that takes place in Carrington Villa, and Area
51 Infiltration. Additionally, the multiplayer level Skedar will freeze
sometimes depending on where you start.

The total amount of codes that you can active with a version 3.0 cheating
device is about 128. Subtract the 50 line long enabler from that and you're
left with 78. If you try to activate more than 78 lines of code in hirez the
game will freeze. You don't need to have the enable code on in lorez.

Even though you can only hack the game in lorez, you can gain access to the
Perfect Menu with the cheat shown below. From the Perfect Menu you should be
able to load any multiplayer level or solo level with the help of level mods.
Solo levels are best loaded from the Cinema menu.

Change the Small but Perfect Menu into the Perfect Menu:
NTSC PAL
8107529A 5674 8107575E 5674
8107529E 39D0 81075762 3DB4
810752A2 69C0 81075766 72B8

When you want to make multiplayer level mods, all of the normal multiplayer
levels can be mixed and matched, but only a few of the solo arenas will work in
lorez. The solo arenas that will work in lorez are:

Crash Site
Chicago
G5 Building (Solo)
Carrington Institute
Air Base
Skedar Ruins
Investigation

Any other solo arenas that aren't listed here won't work in lorez due to them
being too large.


____________________________________________________________

Hacking with a version 3.3 cheating device and PC link cable
____________________________________________________________

Hacking with a version 3.3 cheating device is quite similar to hacking with a
version 3.0, the difference is that you can connect the version 3.3 up to a
computer via a PC link cable. If you don't have a PC link cable then you can
only hack in lorez with the in-built code generator. Other than that, the
version 3.3 Gameshark / Action Replay is a lot better and easier to use than
the version 3.0. Getting Perfect Dark to work with a version 3.3 cheating
device works exactly the same way as getting PD to work with a version 3.0, so
look in the section above to find out how to get the game up and running.

There are some Gamesharks Pros / Action Replay Pros version 3.3 that the PC
link cable won't work with. Datel released a bunch of dud cheating devices with
parts missing from them. It's easy to tell if you've got a dud cheating device.
If the LED is missing (little white box in the front on the inside) and you see
no numbers when you turn your cheating device on it's a dud (we hate you for
this Datel). If you're buying a new cheating device make sure it has an LED.
Your best bet is to buy a Gameshark Pro version 3.2. There aren't any duds of
this version and it can be upgraded to a 3.3 (providing you don't have Windows
XP Service Pack 2). A Gameshark Pro version 3.2 will also work in a PAL N64, so
if you're a PAL user get one of these if you can't find anything else.

Two differences between the 3.0 and 3.3 version when it comes to Perfect Dark
is first the hirez enabler code, and secondly the amount of codes you can
activate. Instead of having to use a 50 line long hirez enable code you simply
need just one code. This code always starts with the value FF, which means it
defines were in the memory the cheating device is going to store the data for
the codes you've activated. You want to put this data in a part of the memory
that Perfect Dark doesn't use. Finding a place to put this data is as easy as
finding somewhere with lots of zeros. The next problem is finding out which
levels put their data where. You need a spot of zeros which none of the levels
put their data at. This can sometimes be rather tricky. The 50 line long
enabler puts the codes you've activated in the same spot where Villa (Solo) and
Infiltration puts level data (which is why the game crashes when you try to
load one of these levels). I'm telling you all this because the official hirez
enablers from Datel don't always get the job done. You may have to make your
own enabler code that will work for a specific level.

There are three enablers that can be found on the internet, but I'll only list
two of them here and tell you their faults. You can only have one hirez enabler
on at a time. The following investigations have been made by me with a PAL
cheating device.

Hirez Enabler 1:
NTSC AND PAL
FF000220 0000

This enabler will allow you to play every single level in the game. It's fully
compatible with all the levels but has a fatal flaw. You can only activate 10
lines of code with this enabler on. Some level modifying codes require you to
activate more than just 10 lines of code.

Hirez Enabler 2:
NTSC AND PAL
FF75C000 0000

This enabler will allow you to activate up to the maximum number of lines of
code possible (+-250 lines). Unfortunately, it has the same compatibility as
the 50 line long version 3.0 hirez enabler. You can't play in Villa (Solo) or
Infiltration with this enabler on.

Since these two enablers don't allow you to play in some levels, I made my own
enabler. The following enabler should allow you to play in all levels, and
activate up to +-250 lines of code.

Krijy's Hirez Enabler:
NTSC PAL
FF72C5A0 0000 FF730000 0000

If for some reason you find a level that doesn't work with an enabler, and want
to make your own Perfect Dark hirez enabler, than a place to look for zeroes is
80700000 to 80750000. The zeroes in this area of the memory seldom get written
to.

If you have problems with loading Perfect Dark in lorez then the following code
should help:

Lorez Enabler:
NTSC AND PAL
EE000000 0000

If you have a PC link cable, you can hack Perfect Dark with the help of some
useful programs on your PC. One thing you may want to note about a PC link
before you use it is that it sometimes plays around with the cheating device.
If you use the PC link, and then turn off you N64 and try to start it again,
the cheating device might not start. This can be solved by plugging in the PC
link again. Another annoying thing when using a PC link is that you may have to
pull the cheating device out of the N64, and wait for a few seconds before it
works again.

Once you've got a PC link connected up you have to download a few helpful
programs from the internet:

Official N64 Gameshark Utilities:
Homepage: http://www.gscentral.com/
Download link: http://www.gscentral.com/lib/downloads/n64gameshark_pro_v3_3.zip

N64 Gameshark Utilities patch:
Homepage: http://www.gscentral.com/
Download link: http://www.gscentral.com/lib/downloads/Patch_N64_Utils.exe

Perfect Trainer:
Homepage: http://homepage.ntlworld.com/icemariouk/
Download link: http://homepage.ntlworld.com/icemariouk/files/
Perfect.Trainer.v1.0b.rar

Game Software Code Creator:
Homepage: http://www.cmgsccc.com/
Download link: http://www.gscentral.com/lib/downloads/gscc2k2.zip